A practical decision making on design of fixed offshore wind turbine support structure considering socio-economic impact
Department of Ocean Engineering, Indian Institute of Technology Madras, Chennai, India
S Surendran
Department of Ocean Engineering, Indian Institute of Technology Madras, Chennai, India
DOI: https://doi.org/10.36956/sms.v1i1.5
Copyright © 2019 M Vishnu, S Surendran. Published by Nan Yang Academy of Sciences Pte. Ltd.
This is an open access article under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License.
Abstract
Wind energy is considered one of the most promising alternative energy sources against the conventional fossil fuels. However, the deployment of these structures in deep-water for better power production is considered as a complex task. This also has raised the issue regarding selection of appropriate support structures for various sea conditions by considering environmental impact and carbon footprint. This paper considers a jacket like support structure as a case study for an intermediate water depth (50m). The jacket is considered to be located in North of Dutch Sea, and 100-extreme wave is applied as load condition. Here, the presented methodology provides an insight towards environmental/social impact made by the optimized designs in comparison with reference design.Keywords: Wind turbine support structure; Sustainable design; Optimization; Multi criteria decision making; Non-linear based design
References
[1] Chew K-H, Tai K, Ng EYK, Muskulus M. Analytical gradient-based optimization of offshore wind turbine substructures under fatigue and extreme loads. Mar Struct. 2016;47:23–41.
[2] Gentils T, Wang L, Kolios A. Integrated structural optimisation of offshore wind turbine support structures based on finite element analysis and genetic algorithm. Appl Energy. Elsevier Ltd; 2017;199:187–204. Available from: http://dx.doi.org/10.1016/j.apenergy.2017.05.009
[3] Gomes HM. Truss optimization with dynamic constraints using a particle swarm algorithm. Expert Syst Appl. Elsevier Ltd; 2011;38(1):957–68. Available from: http://dx.doi.org/10.1016/j.eswa.2010.07.086
[4] Coello C a C, Pulido GT, Lechuga MS. Handling multiple objectives with particle swarm optimization. Evol Comput IEEE Trans. 2004;8(3):256–79.
[5] API. Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms — Working Stress Design. Api Recomm Pract [Internet]. 2007;24–WSD:242.
[6] International Organization for Standards (ISO). Petroleum and natural gas industries — Fixed steel offshore structures. Iso 19902. 2007;2007:638.
[7] Nizamani Z. Environmental Load Factors and System Strength Evaluation of Offshore Jacket Platforms. 2015. 128 p.
[8] Potty NS, Sohaimi AFA. Ultimate Strength Assessment For Fixed Steel Offshore Platform. Malaysian J Civ Eng. 2013;25(2):128–53.
[9] Yukio U, Rashed SMH. The idealized structural unit method and its application to deep girder structures. Comput Struct. 1984;18(2):277–93.
[10] SINTEF GROUP. USFOS Getting Started. 2001;106. Available from: www.usfos.com
[11] Carbon Trust. Offshore wind power : big challenge, big opportunity Maximising the environmental, economic and security benefits Table of Contents. Renew Energy. 2009;
[12] Lozano-Minguez E, Kolios AJ, Brennan FP. Multi-criteria assessment of offshore wind turbine support structures. Renew Energy [Internet]. Elsevier Ltd; 2011;36(11):2831–7. Available from: http://dx.doi.org/10.1016/j.renene.2011.04.020
[13] Vorpahl F, Popko W, Kaufer D. Description of a basic model of the “ UpWind reference jacket ” for code comparison in the OC4 project under IEA Wind Annex XXX. Fraunhofer Inst Wind. 2011;1(February):1–14.
[14] Montes-Iturrizaga R, Heredia-Zavoni E, Vargas-Rodríguez F, Faber MH, Straub D, de Dios de la O J. Risk Based Structural Integrity Management of Marine Platforms Using Bayesian Probabilistic Nets. J Offshore Mech Arct Eng . 2009;131(1):11602.
[15] Abdel Raheem SE. Nonlinear behaviour of steel fixed offshore platform under environmental loads. Ships Offshore Struct. Taylor & Francis; 2016;11(1):1–15. Available from: http://dx.doi.org/10.1080/17445302.2014.954301
[16] Wei K, Myers AT. Directional effects on the reliability of non- axisymmetric support structures for offshore wind turbines under extreme wind and wave loadings. Eng Struct. Elsevier Ltd; 2016;106(October):68–79. Available from: http://dx.doi.org/10.1016/j.engstruct.2015.10.016
[17] Kennedy J, Eberhart R. Particle Swarm Optimization. 1995;1942–8.
[18] Perez RE, Behdinan K. Particle swarm approach for structural design optimization. Comput Struct. 2007;85(19–20):1579–88.